|
Waterborne Fluorinated Resin Series
Luxecolor® FC Series
Fluoropolymer water emulsions with high fluorine contents (59-61%) are
supplied. Luxecolor® FC E4300 and FC E4600 forms flexible coating films at
ambient temperature. Luxecolor® FC R4300, FC R4600 forms non-flexible coating
films under ambient temperature. Those are single component high fluorine
fluoropolymer emulsions. The procedure for forming coating films is very simple:
coating the surfaces, let water to evaporate and obtain dry coating. The
surfaces before coating should be clean and dry. If higher mechanical strength
of the coating films are required, one can further heat the surfaces in oven.
The temperature should be determined by tests and not exceeding 250º C for long
period. The main application of both fluoropolymer emulsions is to produce
protect coatings for resist chemical attack, such as chlorine, ozone, alkalis,
alcohols, and etc.
MiracleCoat® F 500 Series
Fluoropolymers well known having outstanding performance,
such as superior stability against UV exposure, weathering, chemicals, and microbes.
Aqueous fluorocarbon resins not only preserve
excellent properties, such as prominent durability, stain resistance,
decoration, etc., but also achieve environmental harmony.
MiracleCoat® F500 series are single component waterborne latex by the
copolymer latex of chlorotrifluoroethylene (CTFE) and acrylic monomers. It has very
good weathering stability, excellent durability and stain resistance.
MiracleCoat® F500-1 is used to make performance coatings, for example external coatings.
MiracleCoat® F500-2 is preferred for interior and exterior coatings.
MiracleCoat® F500-3 is a sealer for providing substrate surfaces that
coordinate with the aqueous fluorocarbon top coatings.
MiracleCoat® F600 Series
MiracleCoat® F600 series are the waterborne latex of copolymers of CTFE, vinyl esters
and functional acrylic monomers. The hydroxyl functional groups in F600 provide cure sites
for crosslinking. F-600 resins can be cured with isocyanates to form fluorinated
polyurethanes under ambient temperatures. They also can be cross-linked with
amino-resin under reduced-temperature baking processes.
Luxecolor® FC Series Product Specification:
|
Item |
Technique Index of LuxeColor®
FC Series |
|
E4300 |
E4600 |
R4300 |
R4600 |
|
Appearance |
Milky White Liquid |
|
Fluorine Content of dried Film (%) |
59-61 |
|
Solid (%) |
55±! |
|
Viscosity (Pa.S) |
25-30 |
|
Density of Dried Film (g/ml) |
1.9-2.0 |
|
pH |
8-9 |
|
Particle Size (micron) |
0.05-0.25 |
|
Ca+2 Stability (0.5% CaCl2) |
Stable during 48 Hrs |
|
Mechanical Stability (2500r/min 0.5 hr) |
Excellent |
|
Dilution Stability (diluted to 0.1 %w/w, 72 hrs) |
Excellent |
|
Freeze-thaw Stability |
Pass three circles |
|
Ionic Character |
Anionic |
MiracleCoat® F500
Series Specification:
|
Item |
Technique Index |
|
F500-1 |
F500-2 |
F500-3 |
|
Appearance |
Milky white
liquid |
|
Fluorine Content of Dried Film (%) |
25-30 |
|
Non-Volatile (wt%) |
47±1 |
47±1 |
43±2 |
|
Viscosity (Pa.S) |
30～100 |
30～100 |
30～100 |
|
Density of Dried Film (g/ml, at 25º
C) |
1.4-1.5 |
|
pH |
7～9 |
|
MFT(º C)
(reference value) |
23±2 |
15±2 |
11±2 |
|
Particle Size micron |
0.1～0.3 |
0.1～0.3 |
－ |
|
Ca2+ Stability（0.5%CaCl2） |
48 hours no delaminating、no
de-emulsification |
|
Mechanical Stability（2500r/min，0.5h） |
Excellent |
|
Dilute Stability（Dilute
to 3±0.5%） |
72 hours no delaminating、no
de-emulsification |
|
Freeze-Thaw Stability |
Pass three circles |
|
Ionic Character |
Anionic |
MiracleCoat® F600
Series Product Specification:
|
Item |
Technique Index
F600 |
|
Appearance |
Milky light
yellow liquid |
|
Fluorine Content of Dried Film (%) |
25-30 |
|
Non-Volatile (wt%) |
≥41 |
|
Hydroxyl Value (mg KOH/g) |
45-55 |
|
Acid Value (mg KOH/g) |
10-12 |
|
Viscosity (Seconds, 4th Cup) |
10-30 |
|
Density of Dried Film (g/ml, at 25º
C) |
1.4～1.5 |
|
pH |
8～9 |
|
Average Numerical Molecular Weight |
3000-30000 |
|
Particle Size nanometer |
50 (60%) |
|
Ca2+ Stability（0.5%CaCl2） |
48 hours no delaminating、no
de-emulsification |
|
Mechanical Stability（2500r/min，0.5h） |
Excellent |
|
Dilute Stability（Dilute
to 3±0.5%） |
72 hours no delaminating、no
de-emulsification |
|
Freeze-Thaw Stability |
Pass three circles |
|
Ionic Character |
Anionic |
Packing & Storage
●Packing：1kg \bottle.
●Storage
Condition：The product
should be kept in tightly closed containers, avoid freezing and strong heat, and
it should be used within 6 months whenever possible. The recommended normal
storage temperature is between 5～30º
C.
Product Safety Information
Read and understand the current
Material Safety Data Sheet（MSDS）of
the product .
|
Notes |
PVC=51.20%, CPVC=57.78%. |
|
Coating
Characteristics |
Fineness:45µm;Viscosity:90
KU; pH:8-9;Solids content：55.3%.
Emulsion Density：（1.40~1.50
）g/ml.； |
|
Coating Film Performance |
|
Template Preparation |
According to CB/T 9755-2001 |
|
Water Resistance
|
96 hours, no change |
Alkali Resistance |
48 hours, no change |
|
Scrub Resistance |
≥20000
times |
Dirt Resistance |
8.5% |
|
Contrast Ratio |
0.96 |
Gloss
|
Matt |
|
Accelerated Ageing
Test |
1200h，no blister,
no peeling, no crack; chalk: 0 grade; Discolor: 2nd grade. Accelerated ageing
condition：Xenon arc
emission，Black panel
temperature：（65±2）ºC，Relative
humidity：60%-80%，Irradiance：55W/m2,
Wavelength range:（300-400）nm。Rinse
period：18min/102min
|
MiracleCoat® F500 & F600
Series Coating Film Specification:
|
Notes |
PVC=67.06%；CPVC=53.09% |
|
Coating
Characteristics |
Fineness:55µm；Solids
content:58.2%；Viscosity：100KU；pH
value:9; Emulsion Density：（1.40-1.60）g/ml。 |
|
Coating Film
Performance |
|
Template Preparation |
According to CB/T 9756-2001 |
|
Contrast Ratio |
0.95 |
|
Alkali Resistance |
48 hours normal |
|
Scrub Resistant
|
≥10000 times |
|
VOC（Volatile Organic
Compound） |
＜100
g/l |
|
Harmful Heavy Metal
Content (ppm) |
Pb |
0.12
mg/kg |
|
Cd |
0.06 mg/kg |
|
Cr |
0.96 mg/kg |
|
Hg |
0.10 mg/kg |
|
Formaldehyde Content (ppm) |
40 mg/kg |
Field Application
Specification of Aqueous Fluorocarbon Paint
|
ITEM |
COATING NOTES |
|
Surface Treatment |
The substrate to be coated should be clean，dry，level, stable
moisture＜10%,
pH＜10.
Remove all loose dirt, grease, mildew, and other
surface contaminations.
Removed unstable old film by high pressure wash or
scraper whichever is appropriate. |
|
Application Method |
Brush，roller
or spray. |
|
Application Condition |
The
substrate temperature for application should be above 5º
C；
Air relative humidity should be below 85%；
Stop applying in raining or windy climate. |
|
Recoating Interval |
over 2 hours (23±2)º
C. |
|
Dilution |
Thinning is not necessary. If needed, add water less
than 5% of all according to request. |
|
Recommended paint
system |
Sealer：One
coat of F500-3 Paint.
Finish：Two
coats of F500-1Paint or F500-2 Paint. |
|
Coating Film Thickness |
60 microns DFT |
|
Tools cleaning |
Clean up tools with water immediately after use. |
———————————————————————————————————————————————————————————————————————
The information and
recommendations given herein are based on our research and are believed to be
correct., but no guarantee or their accuracy is made. In using these products,
we recommend that the purchasers must establish for yourself the most suitable
formulations, production methods and control tests to ensure the uniformity and
quality of your product and be suitable for their particular purposes under
their own operating conditions.
———————————————————————————————————————————————————————
|
